45
VQT1W65
Advanced (Recording pictures)
[REC] mode: ¿
Taking pictures that match the scene being
recorded
(Scene mode)
When you select a Scene mode to match the subject and recording situation, the camera
sets the optimal exposure and hue to obtain the desired picture.
In [MY SCENE MODE], you can register the Scene mode you use most frequently as one
of the Recording modes.
Slide the [REC]/[PLAYBACK] selector switch to [!], and then press
[MODE].
Move 3/4 to select [ ] ([MY SCENE MODE]), and
then press [MENU/SET].
• If you have already registered My scene mode, the icon for the
registered Scene mode will be displayed, rather than [ ].
Move 3/4/2/1 to select the Scene mode.
• You can switch menu screens from any menu item by rotating
the zoom lever.
Press [MENU/SET] to set.
• The menu screen is switched to the recording screen in the
selected Scene mode.
• The selected Scene mode is registered as My Scene mode, so that the next time you
are recording, you can select it from [REC MODE].
∫ About the information
• If you press [DISP.] when selecting a Scene mode in step 3,
explanations about each Scene mode are displayed. (If you press
[DISP.] again, the screen returns to the Scene mode menu.)
∫ Changing My scene mode
1 On the recording screen for My scene mode, press [MENU/SET] to display the
menu screen.
2 Move 3 to select [¿], switch menus and move 1.
• For details on switching menus, refer to P20.
3 Move 3/4/2/1 to select the Scene mode.
4 Press [MENU/SET] to set.
Registering scenes in Scene mode ( : My scene mode)
DMC-FS25PPC-VQT1W65_eng.book 45 ページ ２００９年１月２２日 木曜日 午前１１時６分
To Next Page
Loading...
Need help?
General
