VQT1W65
74
Advanced (Playback)
You can add text (comments) to pictures. After text has been registered, it can be included in
prints using [TEXT STAMP] (P75). (Only alphabetical characters and symbols can be entered.)
Names set in [BABY1]/[BABY2] and [PET] in Scene mode or [LOCATION] in Travel date
are also recorded as the titles.
Select [TITLE EDIT] on the [PLAYBACK] mode menu. (P19)
Move 3/4 to select [SINGLE] or [MULTI] and then
press [MENU/SET].
Move 3/4/2/1 to select text and then press
[MENU/SET] to register.
• Press [DISP.] to switch text between [A] (capitals), [a] (lower
case) and [&/1] (special characters and numbers).
• The entry position cursor can be moved left and right with the
zoom lever.
• To enter a blank, move the cursor to [SPACE] or to delete an entered character, move
the cursor to [DELETE], and press [MENU/SET].
• To stop editing at any time during text entry, press [‚].
• A maximum of 30 characters can be entered.
Move 3/4/2/1 to move the cursor to [EXIT] and then press [MENU/
SET] to end text input.
Press [‚] to return to the menu screen.
¢
¢The menu screen is automatically restored when [MULTI] is selected.
• Press [MENU/SET] to close the menu.
∫ Delete the title
[SINGLE] setting
1 In step 4, delete all the texts, select [EXIT], and press [MENU/SET].
2 Press [‚].
3 Press [MENU/SET] to close the menu.
[TITLE EDIT]
Select the picture, and then press
[MENU/SET] to set.
•[’] is displayed for pictures with titles
already registered.
[MULTI] setting
Press [DISP.] to set (repeat), and then
press [MENU/SET] to set.
• The setting is canceled when [DISP.] is
pressed again.
[SINGLE] [MULTI]
Move 2/1 to select
the picture.
Move 3/4/2/1 to
select the pictures.
DMC-FS25PPC-VQT1W65_eng.book 74 ページ ２００９年１月２２日 木曜日 午前１１時６分
To Next Page
Loading...
