- 129 -
Wi-Fi
Press the wireless access point (broadband router) WPS button until it switches to
WPS mode.
•
A message is displayed when the wireless access point (broadband router) has been
saved.
• Refer to the wireless access point (broadband router) instruction manual for details.
1 Touch the wireless access point (broadband router) you are connecting to.
2 Enter the PIN code displayed on the camera screen into the wireless access
point (broadband router).
3 Touch [Next].
•
A message is displayed when the wireless access point (broadband router) has been
saved.
• Refer to the wireless access point (broadband router) instruction manual for details.
When connecting with [WPS (Push-Button)]
When connecting with [WPS (PIN)]
To Next Page
Loading...
