- 41 -
Basic
• When you connect the camera to a TV, the volume of the TV speakers does not change.
• Some subjects may appear differently from actuality on the LCD monitor. However, this does
not affect the recorded pictures.
[Beep]
This allows you to set the beep and shutter sound.
[
r] ([Beep Level]):
[t] (Low)
[u] (High)
[s] (Muted)
[ ] ([Shutter Vol.]):
[] (Low)
[ ] (High)
[] (Muted)
[] ([Beep Tone]):
[]/[]/[]
[] ([Shutter Tone]):
[]/[]/[]
[Volume] Adjust the volume of the speaker to any of 7 levels.
[LCD Display]
Adjust the brightness and contrast, or red or blue tint of the LCD
monitor.
[ ] ([Brightness]):
Adjust the brightness.
[ ] ([Contrast · Saturation]):
Adjust the contrast or clarity of colours.
[ ] ([Red Tint]):
Adjust the red tint.
[ ] ([Blue Tint]):
Adjust the blue tint.
1 Touch the item to set and adjust
with [ ]/[ ]
2 Touch [OK].