50
Recording Modes
SQT0196 (ENG)
6
Press 3/4 to select the item and then press [MENU/SET].
7
Press the shutter button halfway.
8
Press the shutter button fully.
• Confirmation screen for creating a motion picture is displayed next, so select [Yes].
9
Select the methods for creating a motion picture.
• The recording format is set to [MP4].
10
Select [OK] with 3/4, and then press [MENU/SET].
∫ Changing the Time Lapse Shot settings
You can change the settings in [Time Lapse/Animation] in the [Rec] menu.
[Start Time]
[Now] Starts the recording by fully-pressing the shutter button.
[Start Time
Set]
You can set the time to start recording.
Any time up to 23 hours 59 minutes ahead can be set.
Select the item (hour or minute) by pressing 2/1,
set the start time by pressing 3/4, and then press
[MENU/SET].
[Shooting
Interval]/
[Image
Count]
The recording interval and the number of pictures can be set.
2/1: Select the item (minute/second/number of pictures)
3/4: Setting
[MENU/SET]: Set
• A recording interval ranging from 1 second to 99 minutes and
59 seconds can be set at 1 second interval.
• The number of pictures ranging from 1 to 9999 can be set.
[Rec Quality]
Sets the quality of a motion picture.
[4K/30p]/[FHD/60p]/[FHD/30p]/[HD/30p]/[VGA/30p]
[Frame Rate]
Sets the number of frames per second.
The larger the number is, the smoother the motion picture will
be.
[60fps]
¢
/[30fps]/[15fps]/[10fps]/[7.5fps]/[6fps]/[3fps]/[1fps]
¢ Only when set to [FHD/60p]
[Sequence]
[NORMAL]:
Splices pictures together in recording order.
[REVERSE]:
Splices pictures together in reverse recording order.
DMC-FZ1000_PPC_eng.book 50 ページ ２０１４年５月３０日 金曜日 午後５時９分
To Next Page
Loading...
