53
Recording Modes
(ENG) SQT0196
Applicable modes:
You can check areas that may be white saturated by displaying areas above a certain
luminance level in a zebra pattern. You can also set the minimum luminance level (brightness)
to be processed as a zebra pattern.
Optical Image Stabilizer
The camera detects jitter during recording and automatically corrects it, so you can record
images with reduced jitter.
Set the O.I.S. switch to [ON].
∫ Setting the Stabilizer in the [Rec] menu
1
Select the menu.
2
Press 3/4 to select the item and then press [MENU/SET].
Checking areas that may be white saturated ([Zebra Pattern])
> [Custom] > [Zebra Pattern]
[ZEBRA1]
Displays areas above a certain luminance level by a
right-leaning zebra pattern.
[ZEBRA2]
Displays areas above a certain luminance level by a
left-leaning zebra pattern.
[OFF]
—
[SET]
Sets the minimum brightness level for each zebra pattern.
[Zebra 1]/[Zebra 2]
Press 3/4 to select the brightness, and press [MENU/SET].
> [Rec] > [Stabilizer]
[]
([Normal])
Vertical and horizontal shake are compensated for.
[]
([Panning])
Camera shake is corrected for up/down movements.
This mode is ideal for panning (a method of taking pictures which involves
turning the camera to track the movements of a subject which continues
to move in a fixed direction).
DMC-FZ1000_PPC_eng.book 53 ページ ２０１４年５月３０日 金曜日 午後５時９分
To Next Page
Loading...
