- 162 -
Playback/Editing
∫ Upload to the image sharing sites
An upload tool built-in to the camera “LUMIX Image Uploader” is automatically copied to the
card when you setup [Upload Set].
Perform the upload operation after connecting the camera to a PC (P182). For details, refer to
P185.
∫ Canceling all the [Upload Set] settings
1 Select [Upload Set] on the [Playback] menu.
2 Press 3/4 to select [Cancel] and then press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
Note
•
Setting may not be possible for pictures recorded with other cameras.
• It cannot be set with a card with less than 512 MB of memory.
(DMC-FZ200)
•
The pictures that were taken with the [Quality] set to [ ] cannot be set to [Upload Set].
To Next Page
Loading...
