- 37 -
Basic
When there is a backlight, the subject appears darker and the camera will automatically
attempt to correct it by increasing the brightness of the picture.
In Intelligent Auto Mode, backlight compensation works automatically. The [ ] is displayed on
the screen when backlighting is detected. (Depending on the backlighting conditions,
backlighting may not be detected correctly.)
You can easily set the blurriness of the background while checking the screen.
1
Press the rear dial to display [ ].
2
Press 2/1 or rotate the rear dial to adjust.
• Press [ ] to reset the setting to the default state
(AUTO).
• To adjust automatically, reset the setting to the default
state (AUTO).
3
Press [MENU/SET] or the rear dial to set.
The Backlight Compensation
Taking Pictures with Defocus Control Function
To Next Page
Loading...
