- 39 -
Basic
• Open the flash when the flash is to be used. (P75)
• When [ ] is selected, [ ], [ ], [ ] or [ ] is set depending on the type of subject and
brightness.
• When [ ], [ ] is set, Red-Eye Removal is enabled.
• Shutter speed will be slower during [ ] or [ ].
You can adjust the brightness and the color balance in addition to the Intelligent Auto Mode
function.
1
Press [MENU/SET] when in Intelligent Auto
Mode.
2
Press 1 to select [ ] and then press
[MENU/SET].
About the flash
Recording using Intelligent Auto Plus Mode
To Next Page
Loading...
