- 28 -
Preparation
Select [Clock Set] in the [Rec] or [Setup] menu, and press 1. (P52)
•
The clock can be reset as shown in steps 5 and 6.
• The clock setting is maintained for 3 months using the built-in clock battery even without the
battery. (Leave the charged battery in the unit for 24 hours to charge the built-in battery.)
Note
•
If the clock is not set, the correct date cannot be printed when you order a photo studio to print the
picture, or when you stamp the date on the pictures with [Date Stamp] (P147) or [Text Stamp]
(P164).
• If the clock is set, the correct date can be printed even if the date is not displayed on the screen of
the camera.
Changing the clock setting
To Next Page
Loading...
