- 79 -
Recording
Compensating the Exposure
Applicable modes:
Use this function when you cannot achieve appropriate exposure due to the difference in
brightness between the subject and the background.
Note
•
Set the value to [0] when you do not compensate the exposure.
• The set exposure value is memorized even if the camera is turned off.
• The compensation range of the exposure will be limited depending on the brightness of the subject.
1
Press the rear dial to set Exposure
Compensation to a selected state.
A Exposure Compensation value
2
Rotate the rear dial to compensate the
exposure.
B Exposure meter
Underexposed Properly exposed Overexposed
Compensate the exposure towards
positive.
Compensate the exposure towards
negative.
F
SSS
8125
2.8 4.0 5.6
153060
0
-
3
-
3 +3
+3
+3