- 127 -
Advanced (Recording pictures)
∫ Setting up [ ] (AF Tracking)
Note
•
If it fails to lock, AF area will flash in red, and disappear. Try to lock again.
• AF Tracking will not operate when the subject is not specified, the subject is lost, or has failed
to be tracked. The picture will be taken with [
Ø] in [AF MODE] in that case.
• AF tracking cannot be selected for [STARRY SKY], [FIREWORKS], [PIN HOLE] or
[FILM GRAIN] in the scene mode, $ mode, or [COLOR EFFECT] is selected.
• [ ] does not work in AF tracking.
• The focus range is 1 cm (Wide)/2 m (Tele) to ¶.
(Tele-macro function: 1 m to ¶)
• Dynamic tracking function may not work in the following cases:
– When the subject is too small
– When the recording location is too dark or bright
– When the subject is moving too fast
– When the background has the same or similar colour to the subject.
– When jitter is occurring
– When using the zoom
1 Bring the subject to the AF tracking
frame, and press [AF/AE LOCK] to lock
the subject
•
AF area will continuously focus on the
subject's movement once the subject is
recognised. (
Dynamic tracking)
• AF tracking is cancelled when [AF/AE
LOCK] is pressed again.
Before locking Locked
2 Take the picture
To Next Page
Loading...
