Advanced (Recording pictures)
- 78 -
In this mode, up to 3 pictures in black & white, standard, or sepia in the selected modes
are automatically recorded each time the shutter button is pressed.
Press [DISPLAY] to display [COLOR BRACKET]
from the auto bracket.
• It is switched between auto bracket and colour bracket every
time [DISPLAY] is pressed.
Press 2/1 to select the mode.
Press [MENU/SET] to close the menu.
• You can also press the shutter button halfway to finish.
Note
•
When setting exposure bracket, [ ] appears on the screen.
• When setting colour bracket, [ ] appears on the screen.
• When taking pictures using auto bracket after setting the exposure compensation range, the
pictures taken are based on the selected exposure compensation range.
When the exposure is compensated, the exposure compensation value appears on the lower
left of the screen.
• The exposure may not be compensated with auto bracket depending on the brightness of the
subject.
• The auto bracket/colour bracket setting is cancelled if you turn the camera off or
[POWER SAVE] is activated.
• When auto bracket/colour bracket is set, the auto review function is activated regardless of the
auto review setting. (The picture is not enlarged.) You cannot set the auto review function in the
[SETUP] menu.
• In shutter-priority AE and manual exposure, if the shutter speed is set to more than 1 second,
auto bracket is cancelled.
• [Œ] is set for the flash when auto bracket/colour bracket is set.
• Burst is cancelled when auto bracket/colour bracket is set.
• The one set last will take precedence. (auto bracket and colour bracket cannot be set
simultaneously.)
Colour Bracket
OFF
[MODE1]:
[B/W]/[STANDARD]
[MODE2]: [STANDARD]/[SEPIA]
[MODE3]:
[B/W]/[STANDARD]/[SEPIA]
To Next Page
Loading...
