Advanced (Recording pictures)
- 90 -
[REC] mode:
Taking pictures in Custom mode
You can select one of your own custom settings saved with [CUST. SET MEM.] to suit the
picture-taking conditions.
Initial setting of the programme AE mode is registered as the custom settings initially.
Slide the [REC]/[PLAYBACK] selector switch to [!].
Set the Mode Dial to [ ] or [ ].
A Display custom settings
• When set to [ ]
>You can take pictures with the custom settings registered in
the [ ]. ([ ] is displayed on the screen)
• When set to [ ]
>To steps 3 and 4
Press 3/4 to select the custom settings you
want to use, and then press [MENU/SET].
• In [ ], press [DISPLAY] to display the settings for each menu
item. (Press 2/1 to change between screens, and press
[DISPLAY] to return to the selection screen.
• Only the main menu items are displayed.
Press [MENU/SET] to enter the settings.
A Saving of the selected custom settings is
displayed on the screen.
∫ When changing the menu settings
Even if the menu settings are changed temporarily with [ ], [ ], [ ] or [ ]
selected, what has been registered will remain unchanged.
To change what has been registered, overwrite the registered data using [CUST. SET
MEM.] (P89) on the setup menu.
Note
•
You cannot register the settings of the following menu items as a custom mode. If they are
changed, other recording modes will also be affected.
– [CLOCK SET], [TRAVEL DATE], [ZOOM RESUME], [NO.RESET], [RESET] and
[SCENE MENU] in the [SETUP] menu
– [BABY1]/[BABY2] or [PET] birthday and name settings in scene mode
To Next Page
Loading...
