Basic
- 46 -
∫ The Backlight Compensation
Backlight refers to when light comes from the back of a subject.
In this case, the subject will become dark, so this function compensates the backlight by
brightening the whole of the picture automatically.
It is possible to set the focus to the specified subject. Focus will keep following the subject
automatically even if it moves. Refer to P127 for details.
•
Set the [AF TRACKING] in the [REC] mode menu to [ON].
([ is displayed on the screen.)
Bring the subject to the AF tracking frame, and
press [ AF/AE LOCK] to lock the subject
• AF tracking frame will turn yellow.
• An optimum scene for the specified subject will be chosen.
• Press [ AF/AE LOCK] again to release.
• Open the flash when the flash is to be used. (P66)
• [ ], [
i
ˆ], or [i‹] will appear depending on the type and brightness of the subject.
• When [
i
ˆ] or [i‹] is displayed, the Digital red-eye correction (P67) is turned on, and the
flash will be activated twice.
• Flash modes cannot be switched using 1 (‰) in the intelligent auto mode.
AF Tracking Function
About the flash
To Next Page
Loading...
