- 79 -
Advanced (Recording pictures)
[REC] mode:
Taking Pictures using Burst Mode
Pictures are taken continuously while the shutter button is pressed.
Select the ones you really like from among the pictures you have taken.
Press [ ˜/‚ ] to display the burst mode selection
menu, and then press 3/4 to select the burst
mode.
A [˜/‚]button
Press [MENU/SET].
• You can also press the shutter button halfway to finish.
• The menu screen disappears after about 5 seconds. At this time,
the selected item is automatically set.
Take a picture.
• Hold down the shutter button fully to activate the burst mode.
¢ The burst speed is constant regardless of the transfer speed of the card.
• The burst speed values given above apply when the shutter speed is 1/60 or faster and when
the flash is not activated.
[OFF] ˜ ò
Burst speed (pictures/
second)
—2.5
¢
approx. 2
Number of
recordable
pictures
A
—max. 3
Depends on the
remaining capacity of the
built-in memory/card.
›
—max. 5
A
To Next Page
Loading...
