- 69 -
Advanced (Recording pictures)
∫ The available flash range to take pictures
•
The available flash range is an approximation.
• In [HIGH SENS.] (P99) in scene mode, the ISO sensitivity automatically switches to between
[ISO1600] and [ISO6400] and the available flash range also differs.
Wide: Approx. 1.15 m to approx. 24.2 m
Tele: Approx. 1 m to approx. 15.4 m
• In [FLASH BURST] (P101) in scene mode, the ISO sensitivity automatically switches to
between [ISO100] and [ISO3200] and the available flash range also differs.
Wide: Approx. 30 cm to approx.4 m
Tele: Approx. 1 m to approx. 2.5 m
¢ When the [ISO LIMIT SET] (P120) is set to [AUTO]
∫ Adjust the flash output
Adjust the flash output when the subject is small, or the reflectivity is very high or low.
1 Press 3 (È) several times to display [FLASH], and then
press 2/1 to set the flash output.
•
You can adjust from [j2 EV] to [i2 EV] in steps of [1/3 EV].
• Select [0 EV] to return to the original flash output.
2 Press [MENU/SET] to close the menu.
•
You can also close the menu by pressing the shutter button
halfway.
Note
•
When the flash output is adjusted, the flash output value appears on the upper left of the
screen.
• The flash output setting is memorised even if the camera is turned off.
ISO sensitivity
Available flash range
Wide Tele
AUTO 30 cm to 8.5 m
¢
1.0 m to 5.4 m
¢
ISO100 30 cm to 3.0 m 1.0 m to 1.9 m
ISO200 40 cm to 4.2 m 1.0 m to 2.7 m
ISO400 60 cm to 6.0 m 1.0 m to 3.8 m
ISO800 80 cm to 8.5 m 1.0 m to 5.4 m
ISO1600 1.15 m to 12.1 m 1.0 m to 7.7 m
To Next Page
Loading...
