10. Playing Back and Editing Images
270
You can write location information sent from a smartphone (latitude and longitude) on
images.
• You can send location information and write it on images using a smartphone.
(P302)
•
You need to install “Panasonic Image App” on your smartphone. (P294)
• Read the [Help] in the “Image App” menu for further details on how to operate.
Preparation:
Sending location information to the camera from the smartphone.
1 Select the menu. (P63)
2 Press 3/4 to select the period you intend to record location information on
images, then press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
• Images with location information are indicated with [ ].
∫ To pause the recording of location information
Press [MENU/SET] while recording of the location information onto images is taking
place.
•
During a suspended period, [±] is displayed.
Select the period with [±] to restart the recording process from the picture you left off.
∫ To delete the received location information
1 Select the menu. (P63)
2 Press 3/4 to select the period you want to delete, then press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
Not available in these cases:
•
Location information cannot be written to the following images or in the following situations:
– Images recorded after location information was sent to the camera (P302)
– Motion pictures recorded in [AVCHD]
– Images with location information already written to them
– Images protected by [Protect]
– When there is insufficient space left on the card
– When the Write-Protect switch to the card is set to the [LOCK] position
– Images recorded with other devices
[Location Logging]
> [Playback] > [Location Logging] > [Add Location Data]
> [Playback] > [Location Logging] > [Delete Location Data]
MENU
To Next Page
Loading...
Need help?
General
