13. Others
388
• Picture might look whitish when lens or image sensor gets dirty with fingerprints or similar.
> If the lens is dirty turn the camera off and then gently wipe the lens surface with a soft, dry
cloth.
> Refer to P403 when the image sensor gets dirty.
• Check that the exposure is correctly compensated. (P173)
• Is the AE Lock (P171) applied incorrectly?
• Cancel the following settings:
– Burst/Auto Bracket/[ ] of the self-timer (P181)
– White Balance Bracket (P139)
• The subject is beyond the focus range of the camera. (P44)
• There is camera shake (jitter) or the subject is moving slightly. (P223)
• Is [Focus/Release Priority] in the [Custom] menu set to [RELEASE]? (P164)
• Is [Shutter AF] in the [Custom] menu set to [OFF]? (P162)
• Is the AF Lock (P171) applied incorrectly?
• The shutter speed will become slower and the Optical Image Stabilizer function may not work
properly when taking pictures especially in dark places.
> We recommend holding the camera firmly with both hands when taking pictures. (P43)
> We recommend using a tripod and the self-timer (P201) when taking pictures with a slow
shutter speed.
• Are you using a lens which supports the Stabilizer function? (P20)
• When a moving subject is recorded with the electronic shutter, the subject may appear
distorted on the picture. (P179)
• Is there any memory remaining on the card?
The recorded picture is whitish.
The recorded picture is too bright or dark.
Multiple pictures are taken at one time.
The subject is not focused properly.
The recorded picture is blurred.
The Optical Image Stabilizer is not effective.
Taking pictures using White Balance Bracket is not possible.
To Next Page
Loading...
Need help?
General
