11. Using the Wi-Fi function
332
When the Wi-Fi function is used, a record is saved in the history. You can register records
as favorites.
Using the history or favorites list, you can easily connect with the same settings as used
previously.
Check to see if the Wi-Fi settings of the device to connect to are the same as used
previously.
•
If the settings of the device to connect to have been changed, it may not be possible to connect
to the device.
1
Select the menu. (P63)
2
Select [Select a destination from History] or
[Select a destination from Favorite].
3
Select item.
• If the device you want to connect to (smartphone, etc.) is
connected to a wireless access point other than the
camera, you cannot connect the device to the camera
using [Direct]. Change the Wi-Fi settings of the device
you want to connect to so that the access point to be
used is set to the camera.
You can also select [New Connection] and reconnect the devices. (P295)
1 Select the menu. (P63)
2 Select the history you want to register to favorites, and then press 1.
3 Enter a registration name.
•
For details on how to enter characters, refer to “Entering Text” section on P82.
• A maximum of 30 characters can be entered. A two-byte character is treated as two
characters.
Connecting quickly with the same settings as the previous ones
([Select a destination from History]/[Select a destination from Favorite])
> [Setup] > [Wi-Fi] > [Wi-Fi Function]
[Select a destination from
History]
Connects with the same
settings as the previous
ones.
[Select a destination from
Favorite]
Connects with settings
registered as favorites.
Registering records as favorites
> [Setup] > [Wi-Fi] > [Wi-Fi Function] > [Select a destination
from History]
To Next Page
Loading...
Need help?
General
