125
5. 4K Photo and Drive Settings
Selecting pictures from 4K burst file and saving
This section describes how to select pictures from a 4K burst file and save them.
For information on how to record 4K burst files, refer to P118.
1 Select an image with the [ ] icon on the playback screen, and
press 3.
•
You can also perform the same operation by touching the icon [ ].
• If the image was recorded with [ ] ([4K Pre-Burst]), proceed to step 3.
2 Drag the slide bar to make a rough selection of
scenes.
•
For information on how to use the slide view screen, refer
to P126.
• If the image was recorded with [ ] ([4K Burst]) or [ ]
([4K Burst(S/S)]), you can select its scenes on the 4K burst
playback screen by touching [ ] (Fn1). (P127)
3 Drag the frames to select the frame you want to save
as a picture.
•
You can also perform the same operation by pressing 2/
1.
4 Touch [ ] to save the picture.
•
The picture will be saved in JPEG format.
• The picture will be saved with recording information (Exif information), including its shutter
speed, aperture and ISO sensitivity information.
You can save pictures taken during a 5 second period at once by using [4K PHOTO
Bulk Saving] in the [Playback] menu. (P235)
Fn2
Fn1
To Next Page
Loading...
