Panasonic LUMIX DMC-G85 - Page 255

255
10. Using the Wi-Fi function
∫ Manually entering a password to set up a connection
Select the menu. (P51)
A SSID and password
B QR code
• When the camera is ready to be connected to the
smartphone, the QR code, SSID and password are displayed.
• You can also display the information by pressing [Wi-Fi] on the camera.
1 Turn on the Wi-Fi function in the setting menu.
2 On the Wi-Fi setting screen, select the SSID displayed on
the camera.
3 Enter the password displayed on the camera into the
smartphone. (For first time connection only)
•
If you are using an Android device, marking the box for password
display will allow the device to display the password as you enter
it.
4 Start “ Image App”.
To change the connection method, follow the steps below:
Select the menu. (P51)
or
On the camera
> [Setup] > [Wi-Fi] > [Wi-Fi
Function] > [New Connection] > [Remote
Shooting & View]
On your smartphone
Changing the connection method
> [Setup] > [Wi-Fi] > [Wi-Fi Function] >
[New Connection] > [Remote Shooting & View] >
[DISP.] button
> [DISP.] button > [New Connection] >
[Remote Shooting & View] > [DISP.] button
A
B
MENU
Wi-Fi
0123456789ABC
MENU
Wi-Fi