57
2. Getting Started/Basic Operations
¢ Function button settings at the time of purchase.
• When set to [Focus Area Set], it is possible to display the position setting screen of either AF
area or MF Assist.
• Operations of the cursor button and [MENU/SET] are disabled when [Cursor Button Lock] is
set. Press the function button again to enable them.
Not available in these cases:
•
[Fn2] cannot be used in the following cases.
– When recording with [ ] ([4K Burst(S/S)]) of the 4K Photo function
– When using [Time Lapse Shot]
• [Fn4] cannot be used in the following cases.
– Intelligent Auto Plus Mode
– Creative Control Mode
– When using [Multi Exp.]
– When [4K Live Cropping] is set
• [Fn6], [Fn7], [Fn8], [Fn9], and [Fn10] cannot be used when the viewfinder is in use.
You can directly set an assigned function to a selected image by pressing the function
button during playback.
Example: When [Fn2] is set to [Favorite]
1 Press 2/1 to select the picture.
2 Press [Fn2], and then set the image as [Favorite].
∫ Functions that can be assigned in [Setting in PLAY mode]
•
The following functions can be assigned to the button [Fn1], [Fn2], [Fn5] or [Fn11].
¢ Function button settings at the time of purchase.
[Custom] menu
– [Silent Mode] (P209): [Fn3]
¢
– [Peaking] (P213)
– [Histogram] (P214): [Fn8]
¢
– [Guide Line] (P214)
– [Zebra Pattern] (P215)
– [Monochrome Live View] (P216)
– [Rec Area] (P217)
– [Step Zoom] (P152)
– [Zoom Speed] (P152)
– [Touch Screen] (P218)
Using the function buttons during playback
[Playback] Menu/Playback functions
– [Wi-Fi] (P250): [Fn1]
¢
– [LVF/Monitor Switch] (P37): [Fn5]
¢
– [Favorite] (P245): [Fn2]
¢
– [Print Set] (P246)
– [Protect] (P247)
– [Delete Single] (P184)
– [Off]: [Fn11]
¢
– [Restore to Default]
1/981/98
1/98
To Next Page
Loading...
