123
VQT3A36
Recording
Contrast and exposure will be adjusted automatically when there is a big difference in
brightness between the background and subject, to bring the image close to how you see.
Applicable modes:
[OFF]/[LOW]/[STANDARD]/[HIGH]
Note
•
This feature may be automatically disabled, depending on the lighting conditions.
• [ ] in the screen turns to yellow when [I.DYNAMIC] is in effect.
• [LOW], [STANDARD], or [HIGH] represents the maximum range of effect.
It will select optimal ISO sensitivity with set value as limit depending on the brightness of
the subject.
Applicable modes:
[OFF]/[200]/[400]/[800]/[1600]/[3200]
Note
•
The upper limit of the ISO sensitivity can be set.
• The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
• It will work when the [SENSITIVITY] is set to [AUTO] or [ ].
The camera automatically removes noise that appears when the shutter speed becomes
slower to take pictures of night scenery etc. so you can take beautiful pictures.
Applicable modes:
[OFF]/[ON]
Note
•
If you set [ON], the countdown screen is displayed when the shutter button is pressed. Do not
move the camera at this time. After the countdown is finished, [PLEASE WAIT...] is displayed
for the same time as the selected shutter speed for signal processing.
• We recommend using a tripod when the shutter speed is slowed to take pictures.
• [LONG SHTR NR] is disabled during motion picture recording.
[OFF]/[ON]
Note
•
Refer to P66 for details.
[I.DYNAMIC] (Intelligent dynamic range control)
[ISO LIMIT SET]
[LONG SHTR NR]
[EX. TELE CONV.]
DMC-GH2H&GH2K&GH2PP-VQT3A36_eng.book 123 ページ ２０１０年１０月１９日 火曜日 午前１１時３分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
