VQT3A36
150
Playback/Editing
DPOF “Digital Print Order Format” is a system that allows the user to select which pictures
to print, how many copies of each picture to print and whether or not to print the recording
date on the pictures when using a DPOF compatible photo printer or photo printing store.
For details, ask at your photo printing store.
When you set [PRINT SET] for a Burst Picture Group, the print setting for the number of
prints will be applied to every picture in the group.
•
For details about the icon display during Burst Picture Group playback, refer to P138.
For more information visit:
http://panasonic.jp/dc/dpof_110/white_e.htm
1 Select [PRINT SET] on the [PLAYBACK] Mode menu. (P55)
2 Press 3/4 to select the item and then press [MENU/SET].
•
When [SINGLE IN BURST GROUP] or
[MULTI IN BURST GROUP] is selected, press 3/4/2/1 to
select Burst Picture Group, and press [MENU/SET] to proceed to
step
3.
• When [CANCEL] is selected, see “Canceling all the [PRINT SET]
settings
”.
4 Press 3/4 to set the number of prints, and then press [MENU/SET] to set.
•
When [MULTI] has been selected
–repeat steps 3 and 4 for each picture.
–[999+] is displayed on the screen, if the total number of prints you set for a Burst
Picture Group is more than 1000 pictures.
• Press [‚] to return to the menu screen.
∫ Canceling all the [PRINT SET] settings
1 Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].
2 Press 3 to select [YES] and then press [MENU/SET].
•
You cannot select [CANCEL] if not even one picture has been set for printing.
∫ To print the date
After setting the number of prints, set/cancel printing with the recording date by pressing
[DISPLAY].
•
When you go to a photo printing store for digital printing, be sure to order the printing of the
date additionally if required.
• Depending on the photo printing store or the printer, the date may not be printed even if you set
to print the date. For further information, ask at your photo printing store or refer to the
operating instructions for the printer.
• The date print feature is disabled for pictures that are stamped with text.
[PRINT SET]
3
Select the picture, and then press
[MENU/SET].
[SINGLE] [MULTI]
Press 2/1 to select
the picture.
Press 3/4/2/1 to
select the pictures.
DMC-GH2H&GH2K&GH2PP-VQT3A36_eng.book 150 ページ ２０１０年１０月１９日 火曜日 午前１１時３分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
