VQT3A36
88
Recording
Note
•
The optimal White Balance will differ depending on the type of fluorescent lighting being
recorded under so use [AWB], [ ], [ ], [ ] or [ ].
• The White Balance is only calculated for subjects within the range of the camera’s flash.
• The White Balance is memorized even if the camera is turned off, but [WHITE BALANCE] for
the Advanced Scene Mode or the Scene Mode is set to [AWB] when the Advanced Scene
Mode or the Scene Mode is changed.
• White Balance is fixed to [AWB] in following conditions.
– In Intelligent Auto Mode
– In [OUTDOOR PORTRAIT] and [INDOOR PORTRAIT] in [PORTRAIT]
– In [SCENERY]
– In [FOOD] in [CLOSE-UP]
– In [NIGHT PORTRAIT], [NIGHT SCENERY], [SUNSET] or [PARTY] in Scene Mode
– My Color Mode
• When [DIRECT FOCUS AREA] (P83) is set to [ON], the operations on the cursor buttons
translate to movements of the AF area. Set using the Quick Menu (P56).
∫ Setting the White Balance manually
Set the White Balance value. Use to match the condition when taking photographs.
1 Select the white set icon (such as [ ]), and then touch [SELECT WHITE SET].
•
The white set selecting screen can also be displayed by pressing the cursor button toward
3
.
2 Select [ ], [ ], [ ] or [ ] and then touch [WHITE SET].
•
The White Balance setting screen can also be displayed by pressing the cursor button
toward 3.
3 Aim the camera at a sheet of white paper etc. so
that the frame in the center is filled by the white
object only and then touch [SET].
Note
•
White Balance may not be set when the subject is too bright or too dark. Set the White Balance
again after adjusting to appropriate brightness.
∫ Setting the color temperature
You can set the color temperature manually for taking natural pictures in different lighting
conditions. The color of light is measured as a number in degrees Kelvin. As the color
temperature increases, the picture becomes more bluish. As the color temperature
decreases, the picture becomes more reddish.
1 Select [ ] and then touch [WB K SET].
•
The color temperature setting screen can also be
displayed by pressing the cursor button toward 3.
2 Touch the color temperature setting bar.
•
It is also possible to set the values by touching [3]/[4]
or pressing
3/4 of the cursor button.
• You can set a color temperature from [2500K] to
[10000K].
3 Touch [SET].
1
DMC-GH2H&GH2K&GH2PP-VQT3A36_eng.book 88 ページ ２０１０年１０月１９日 火曜日 午前１１時３分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
