80
VQT1C84
Advanced-Viewing
[TRIMMING]
Enlarging a picture and trimming it
Use this function when you trim
unnecessary parts of the recorded picture.
1 Press w/q to select the picture
and then press r.
• The following pictures cannot be
trimmed.
– Motion pictures
– Pictures imprinted with the date stamp
2 Enlarge or decrease the parts to
be trimmed with the zoom lever.
3 Press e/r/w/q to move the
position of the part to be
trimmed.
4 Press the shutter button.
• The message [DELETE ORIGINAL
PICTURE?] appears.
5 Press e/r to select [YES] or [NO]
and then press [MENU/SET].
• When you select [YES], the picture is
overwritten. When trimmed pictures are
overwritten, they cannot be restored.
• When you select [NO], a trimmed picture
is newly created.
• When the original picture is protected,
you cannot overwrite the trimmed picture.
Select [NO] and newly create a trimmed
picture.
6 Press [MENU/SET] twice to close
the menu.
• If you trim a picture, the number of pixels
may be fewer in the trimmed picture than
in the original.
• The picture quality of the trimmed picture
may be deteriorated.
• It may not be possible to trim pictures
recorded with other equipment.
f
Press [ ] to display the [PLAY] mode menu and select the item to set. (P70)
MENU
SET
MENU
100-0001
1/19
7
M
TRIMMING
SELECT
SET EXIT
MENU
SET
MENU
TRIMMING
DELETE ORIGINAL
PICTURE?
CANCEL
YES
NO
SELECT SET
To Next Page
Loading...
Need help?
General
Weight and Dimensions
