EasyManua.ls Logo

Panasonic Lumix DMC-LZ3

Panasonic Lumix DMC-LZ3
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Menu Settings
78
VQT0U87
The message [COPY THIS PICTURE
TO BUILT-IN MEMORY?] appears when
you copy pictures from the card to the
built-in memory.
If you press [MENU/SET] while copying
pictures from the built-in memory to the
card, the copying will stop halfway.
Do not turn the camera off or do any
other operations before copying is
finished. The data on the built-in
memory or the card may be damaged
or lost.
4 Press [MENU/SET] several times
to close the menu.
If you copy picture data from the built-in
memory to a card, the screen
automatically returns to the playback
screen when all the pictures are copied.
If you copy picture data from the built-in
memory to a card, we recommend using a
card which has more free space than the
built-in memory (about 14 MB).
It may take time to copy the picture data.
Only pictures recorded with a Panasonic
digital camera (LUMIX) will be copied.
(Even if the pictures were recorded with a
Panasonic digital camera, you may not be
able to copy them if they were edited with
a PC.)
DPOF settings on the original picture data
will not be copied. Set the DPOF settings
again after copying is finished. (P72)
If a picture with the same name as the
picture to be copied exists in the copy
destination, the picture will not be copied.
If you copy picture data from the built-in
memory to a card which does not have
sufficient free space, the picture data will
only be copied halfway.
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P69)
Usually, it is not necessary to format the
built-in memory and the card. Format them
when the message [BUILT-IN MEMORY
ERROR] or [MEMORY CARD ERROR]
appears.
Press 3 to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
the built-in memory is formatted.)
When a card is not inserted, you can
format the built-in memory. When a
card is inserted, you can format the
card.
If you press [MENU/SET] while
formatting the built-in memory, the
formatting will stop halfway. (However,
all the pictures will be deleted.)
[FORMAT]
Initializing the built-in memory or a
card
MENU
SET
FORMAT
DELETE ALL DATA
ON THE BUILT-IN MEMORY?
NO
SELECT SET
MENU
MENU
SET
YES
VQT0U87ENG.book 78 ペー 005年12月27日 火曜日 午後7時12

Table of Contents

Related product manuals