Panasonic Lumix DMC-TZ2 User Manual

22 VQT1B61 VQT1B61 23
Preparations
6
Using SETUP menu (Continued)
Default setting outlined:
Item Uses, operations Settings, notes
BEEP
1, 2
Change or mute beep sounds.
Volume:
(mute) / (low) / (high) Tone: / /
SHUTTER
1, 2
Change or mute shutter sounds.
Volume:
(mute) / (low) / (high) Tone: / /
VOLUME
2
Adjust volume of sound from speakers (7 levels).
0 · · LEVEL3 · · LEVEL6
Cannot be used to adjust TV speaker volume when connected to TV.
NO. RESET
1
Reset image file numbers and start again from ‘0001’.
File numbers and folder numbers (P.75)
YES/NO
Numbers cannot be reset once folder number reaches 999. In this case, save all
necessary pictures to your computer, and format the built-in memory/card. (P.73)
To reset folder number to 100:
First, format (P.73) the built-in memory or card, and reset the file numbers using NO.
RESET. Then, select ‘YES’ on the folder number reset screen.
RESET
2
Reset SETUP menu (P.20) and REC menu items (P.50) to
their default settings.
RESET REC. SETTINGS? (YES/NO) RESET SETUP PARAMETERS? (YES/NO)
Resetting SETUP parameters causes the following to be reset: Birthdays in BABY
(P.42) and PET modes (P.44), ‘TRAVEL DATE’ (P.48), ‘WORLD TIME’ (P.49), ‘ZOOM
RESUME’ (P.20), ‘FAVORITE’ in PLAY menu (set to ‘OFF’) (P.65), ‘ROTATE DISP.’ (set
to ‘ON’) (P.66), CLIPBOARD menu (INITIAL DISP.) (set to ‘ON’) (P.60)
(Only ‘BEEP’ is reset in the SIMPLE MODE menu.)
Folder numbers and clock settings will not be reset.
VIDEO OUT
Change the video output format when connected to a TV, etc. NTSC / PAL
TV ASPECT
Change the aspect ratio when connected to a TV, etc
(PLAYBACK mode only).
/
When set to , pictures will be displayed vertically long on LCD monitor when
connecting AV cable (supplied) (P.79).
SCENE MENU
Display scene menu when mode dial is set to SCN1 or SCN2.
OFF (use previously selected scene mode) / AUTO (displays scene menu)
To display scene menu when set to ‘OFF’: Press ‘MENU/SET’.
DIAL DISPLAY
1, 2
Display mode dial operation on screen. OFF / ON (display)
LANGUAGE
1, 2
Change display language.
ENGLISH / DEUTSCH (German) / FRANÇAIS (French) / ESPAÑOL (Spanish) /
ITALIANO (Italian) / 中文 (Chinese) / 日本語 (Japanese)
Not displayed on DMC-TZ3P/DMC-TZ2P.
1
Settings also reflected in SIMPLE MODE (P.28).
2
Settings also reflected in CLIPBOARD mode (P.58).

Panasonic Lumix DMC-TZ2 Specifications

General

Megapixel	6 MP
Camera type	Compact camera
Sensor type	CCD
Image stabilizer	Yes
Supported aspect ratios	3:2, 4:3, 16:9
Digital zoom	4 x
Optical zoom	10 x
Focal length range	4.6 - 46 mm
Interface	USB
Digital SLR	No
Camera shutter speed	8 - 1/2000 s
Focal length (35mm film equivalent)	28 - 280 mm
Focus adjustment	Auto
Normal focusing range	0.5- ∞ m
Auto focusing (AF) modes	continuous auto focus, single auto focus
Macro focusing range (tele)	1- ∞ m
Macro focusing range (wide)	0.05- ∞ m
Normal focusing range (tele)	2 - ∞ m
Normal focusing range (wide)	0.5 - ∞ m
Flash modes	Red-eye reduction
Flash range (wide)	0.6 - 4.2 m
Motion JPEG frame rate	30 fps
Maximum video resolution	848 x 480 pixels
Display diagonal	2.5 \
Display resolution (numeric)	207000 pixels
USB version	2.0
Product color	Black
Scene modes	beach, Candlelight, Children, Close-up (macro), Fireworks, Night, Night landscape, Night portrait, party (indoor), Portrait, self-portrait, Sports, Landscape (scenery)
Image editing	resizing, rotating, trimming
Photo effects	black&white, Sepia
White balance	auto, Cloudy, daylight, Fluorescent, Shade
Camera playback	movie, slide show
Battery capacity	1000 mAh
Power requirements	110-240V AC
Battery life (CIPA standard)	300 shots
Number of batteries supported	1
Compatible memory cards	mmc, sd, sdhc

Weight and Dimensions

Depth	59 mm
Width	105 mm
Height	37 mm
Weight	222 g