EasyManuals Logo

Panasonic Lumix DMC-TZ5 User Manual

Panasonic Lumix DMC-TZ5
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
42 VQT1P79 VQT1P79 43
We recommend using a tripod. This is also effective for correcting jitter when pressing the
shutter button, by setting the self timer to 2 seconds.
After self-timer lamp stops flashing, it may then be lit for AF assist lamp.
This function cannot be used in the ‘UNDERWATER’ and ‘HI-SPEED BURST’ scene
modes or in MOTION PICTURE mode .
In some modes, only ‘2SEC.’ or only ‘10SEC.’ may be selected.
INTELLIGENT AUTO mode: ‘10SEC.’
CLIPBOARD mode, ‘SELF PORTRAIT’ scene mode: ‘2SEC.’
Self-timer indicator
(Flashes for set duration)
1
Display ‘SELFTIMER’
2
Select time duration
SELFTIMER
10SEC.
2SEC.
OFF
SET
SELECT
Displayed for approx. 5 sec.
Can also be selected with .
3
Take a picture
Press halfway
(align focus)
Focus will be automatically
adjusted immediately
before recording if shutter
button is pressed fully here.
Press fully
(Picture taken
after selected
time elapsed)
CANCELCANCEL
MENUMENU
55
To cancel while in operation
Press ‘MENU/SET’
Applications
(Record)
5
Taking pictures with self-timer
Corrects exposure when adequate exposure cannot be obtained (if difference between
brightness of object and background, etc.). Depending on the brightness, this may not be
possible in some cases.
e.g. AUTO BRACKET with ±1EV
First picture
0EV
(Standard)
Second picture
-1EV
(Darker)
Third picture
+1EV
(Brighter)
Minus direction
Plus direction
Over-exposed
Optimum exposure
Under-exposed
EXPOSURE
AUTO BRACKET
Takes 3 pictures in succession, changing the exposure. After exposure compensation, the
compensation value is as standard.
1
Display ‘EXPOSURE’
2
Select a value
‘0’ (no compensation)
EXPOSURE
EXIT
MENU
SELECT
The compensation value is displayed on the
bottom-left of the screen. ( , etc.)
1
Display ‘AUTO BRACKET’
Press several times
2
Select a value
‘0’ (no compensation)
EXIT
MENU
SELECT
AUTO BRACKET
Value displayed after exposure compensation set
Cannot be used with flash or when there is remaining capacity for only 2 more pictures.
When ‘AUTO BRACKET’ is set, is displayed on the left of the screen.
Canceled when the power is turned off.
Burst setting is canceled when auto bracket is set.
Applications
(Record)
6
Taking pictures with exposure
compensation
Example of exposure compensation
Downloaded From camera-usermanual.com Panasonic Manuals

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Panasonic Lumix DMC-TZ5 and is the answer not in the manual?

Panasonic Lumix DMC-TZ5 Specifications

General IconGeneral
Megapixel9 MP
Camera typeCompact camera
Sensor typeCCD
Image sensor size1/2.33 \
Digital zoom4 x
Optical zoom10 x
Focal length range4.6 - 46 mm
InterfaceUSB 2.0
Digital SLRNo
Built-in flashYes
Camera shutter speed8 - 1/2000 s
Focal length (35mm film equivalent)28 - 280 mm
Focus adjustmentAuto
Normal focusing range0.5 - ∞ m
Normal focusing range (tele)2 - ∞ m
Internal memory27 MB
Compatible memory cardsmmc, sd, sdhc
Motion JPEG frame rate30 fps
Maximum video resolution1280 x 720 pixels
Display diagonal3 \
USB version2.0
Product colorBlack
Battery capacity1000 mAh
Flash modesauto, Red-eye reduction, Slow synchronization
Scene modesbeach, Children, Close-up (macro), Cuisine, Fireworks, party (indoor), Portrait, self-portrait, Sports, Sunset, Underwater
White balanceauto, Cloudy, custom modes, daylight, Shade
Weight and Dimensions IconWeight and Dimensions
Depth37 mm
Width103 mm
Height59 mm
Weight214 g

Related product manuals