- 132 -
Wi-Fi
∫ Terminating the connection
After use, terminate the connection to the smartphone. Once turning off the connection,
you can perform normal recording and playback.
1 Press [ ].
•
Confirmation screen is displayed.
It is executed when [Yes] is selected.
2 On the smartphone, close “Image App”.
When using an SSID and password to set up a connection
1 Start “Image App”. (P128)
•
If a message appears stating that a camera search is in progress, close the message.
2 Select [Wi-Fi].
3 Select the SSID displayed on the screen of the
camera.
4 Enter the password displayed on the screen of the
camera.
(Only when connecting for the first time)
• If you mark the box that enables the smartphone to display the password, you can see
the password as you enter it.
(If you are using an iOS device)
On the screen of “Image App”, press the home button to close the app.
(If you are using an Android device)
On the screen of “Image App”, press the return button twice to close the app.
Cancel
Please scan the QR code using "Image App",
or enter the password into Wi-Fi settings
Please set on your smartphone
SSID:
Password:
To Next Page
Loading...
