- 87 -
Recording
This effect transforms pin-points of light into a star effect.
This effect leaves one selected colour to emphasise impressiveness.
[Star Filter]
[One Point Color]
∫ Set the colour to leave in
1 Fit the colour you want to leave in
the frame at the centre of the
screen, and then press [MENU/
SET].
•
You can set the colour again by
pressing [DISP.].
2 Check the colour you have set,
and then press [MENU/SET].
•
The set colour is memorised even if
the camera is turned off.
• Depending on the subject, the set colour may not be left in.
To Next Page
Loading...
