- 70 -
Recording
Taking Pictures by Specifying the Aperture/
Shutter Speed
Recording Mode:
Set the aperture value to a higher number when you want a sharp focus background. Set the
aperture value to a lower number when you want a soft focus background.
1
Set the mode dial to [ ].
2
Press [EXPOSURE].
3
Press 2/1 to set the aperture value.
A Aperture Value
4
Press [EXPOSURE].
• The brightness of the monitor and the recorded pictures may differ. Check the pictures on the
playback screen.
• Set the aperture value to a higher number when the subject is too bright. Set the aperture value to a
lower number when the subject is too dim.
• The aperture value and the shutter speed displayed on the screen turn red when the exposure is not
adequate.
• The minimum shutter speed to be set differs according to the ISO sensitivity setting.
• In motion picture recording, the aperture and shutter speed are set automatically.
Aperture-Priority AE Mode
To Next Page
Loading...
