Panasonic Lumix DMC-TZ57

- 161 -
Connecting to other equipment
1
Press 3.
2
Press 3/4 to select an item and then press [MENU/SET].
3
Press 3 to select [Print start] and then press [MENU/SET].
• If the print check screen has appeared, select [Yes], and print the pictures.
• Refer to P162 for the items which can be set before starting to print the pictures.
• Disconnect the USB connection cable after printing.
Selecting a single picture and printing it
1
Press 2/1 to select the picture and then press
[MENU/SET].
2
Press 3 to select [Print start] and then press
[MENU/SET].
• Refer to P162 for the items which can be set before starting
to print the pictures.
• Disconnect the USB connection cable after printing.
Selecting multiple pictures and printing them
[Multi Select]
Multiple pictures are printed at one time.
• Press 3/4/2/1 to select the pictures, and then press [DISP.].
(When [DISP.] is pressed again, the setting is cancelled.)
• After the pictures have been selected, press [MENU/SET].
[Select All]
Prints all the stored pictures.
• When 481 or more images are stored, 480 images will be printed,
starting with the oldest one.
• To print the 481st and subsequent images, select images in
[Multi Select].
[Print Set (DPOF)] Prints the pictures set in [Print Set] only. (P121)
PictBridge
PictBridge
PictBridge
OFF
1
3ULQWZLWK'DWH
1XPRISULQWV
3DSHU6L]H
3DJH/D\RXW
6LQJOH6HOHFW
6HW6HOHFW
&DQFHO
3ULQWVWDUW