Turn on the power
Status indicator illuminated for
approx. 1 second.
Set to
: Pictures and motion
pictures can be taken.
: The captured pictures and
motion pictures can be
played back.
Set to the desired recording mode
Aim the camera and shoot
(Press the shutter button)
Press halfway
(Adjust the focus)
Press fully
When recording motion pictures,
fully press the shutter button one
more time to end recording.
Status indicator
Shutter button
The illustration
shows the DMC-TZ6.
For the operating procedures for the DMC-TZ7, see P.28.
Flash
AF assist lamp
• Stand with your arms close to your body and with
your legs apart.
• Do not touch the lens.
• Do not block the microphone when recording audio.
(P.12)
• Do not block the flash or the lamp. Do not look at it
from close range.
• Pictures taken with camera held vertically can
automatically be displayed vertically in playback.
(Only when ‘ROTATE DISP.’ (P.94) is set to ‘ON’)
Pictures may not be able to be displayed vertically
if taken with camera facing upwards or downwards.
Motion pictures cannot be displayed vertically during
playback.
Align to
correct mode
The current mode will be displayed on the
LCD monitor when the mode dial is turned.
INTELLIGENT AUTO
Mode
Take pictures with automatic settings (P.32).
NORMAL PICTURE Mode
Take pictures with customized settings (P.35).
MY SCENE MODE
Taking pictures in frequently-used scene
modes (P.60).
SCENE MODE
Take pictures according to scene (P.51).
MOTION PICTURE Mode
Take motion pictures (P.64).
CLIPBOARD Mode
Take pictures as memos (P.81).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
