MENU/SET
(menu display/set/finish) (P.18)
Left cursor button (◄)
• Self-timer (P.48)
Down cursor button (▼)
• Macro mode (P.45)
• AF Lock (AF tracking) (P.34, 73)
The appearance, specifications, and screen display vary depending on the model that is used. The
descriptions in this manual are primarily based on the DMC-TZ7.
1
DMC-TZ6/DMC-TZ65 has only one microphone (Monaural).
2
This is not available in the DMC-TZ6/DMC-TZ65.
3
The size in the DMC-TZ6 is different.
4
DMC-TZ6 does not have this button.
Tripod receptacle
Card/Battery door (P.15)
Release lever (P.15)
We recommend using
the supplied hand strap
to avoid dropping the
camera.
Mode dial
( P.29, P.31)
Shutter button
( P.28, P.30)
Camera ON/OFF switch (P.17)
Flash ( P.29, P.31)
Self-timer indicator (P.48)/
AF assist lamp
(P.78)
Lens barrel
Lens
(P.11)
Zoom lever (P.37)
STEREO MIC
1
( P.61 ( 64), 78, 97)
Speaker (P.21)
LCD monitor
3
(P.21, 22, 42, 112)
Status indicator
(P.15, 32)
REC/PLAY switch
( P.28, 40, P.30, 40)
DISPLAY button (P.42)
Q.MENU (Quick setting P.20)/
delete button
(P.41)
HDMI socket
2
(P.108, 109)
AV/DIGITAL/MULTI
socket
(P.101, 103,
104, 107)
• Always use a genuine
Panasonic AC adaptor
(DMW-AC5E: optional).
• Do not use any other adaptors except a
genuine Panasonic multi conversion adaptor
(DMW-MCA1; optional).
Motion picture button
4
(P.61)
E.ZOOM button (P.38)
In this manual, the button that is used is shaded or indicated by▲▼◄►.
Up cursor button (▲)
• Exposure compensation (P.49)
• Auto bracket (P.49)
• Multi aspect
2
(P.50)
• White balance fine adjustment (P.72)
Right cursor button (►)
• Flash (P.43)
About batteries that you can use with this unit (as of February 2009)
The battery that can be used with this unit is DMW-BCG10E.
It has been found that counterfeit battery packs which look very similar to the
genuine product are made available to purchase in some markets. Some of
these battery packs are not adequately protected with internal protection to
meet the requirements of appropriate safety standards. There is a possibility
that these battery packs may lead to fire or explosion. Please be advised that
we are not liable for any accident or failure occurring as a result of use of
a counterfeit battery pack. To ensure that safe products are used we would
recommend that a genuine Panasonic battery pack is used.
• Use the dedicated charger and battery.
•
This camera has a function identifying batteries that can be used, and this function is
compatible with the dedicated battery (DMW-BCG10E). (Batteries not compatible with
this function cannot be used.)
Battery (model-specific)
Charging light (CHARGE)
On:
Charging in progress, approx. 130 min. (Max.)
Off: Charging complete
If light is flashing:
• Charging may take longer than normal if
battery temperature is too high or too low
(charging may not be completed).
• Battery/charger connector is dirty. Clean with
a dry cloth.
Charger (model-specific)
Insert the battery
terminals and attach
the battery to the
charger
Ensure ‘LUMIX’ faces
outwards.
Connect the AC mains lead
The AC mains lead does
not fit entirely into the AC
input terminal. A gap will
remain as shown above.
Detach the battery
after charging is
complete
Disconnect charger and
battery when charging is
complete.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
