Wi-Fi/NFC
Sending pictures to a PC
VQT5E85
- 218 -
■
Sending a picture each time one is recorded ([Send Images While
Recording])
Press [Wi-Fi] button
Use cursor button to select [New Connection] and press
[MENU/SET]
Use cursor button to select [Send Images While Recording]
and press [MENU/SET]
Use cursor button to select [PC] and press [MENU/SET]
Select [Via Network] or [Direct] to connect (→245)
Select the PC you want to connect to
• If the PC you want to connect to is not displayed, select [Manual Input], then enter
the computer name (for Mac, enter the NetBIOS name).
Select the folder you want to send to
• When the connection is complete, the screen is displayed. To change the send
setting, press [DISP.] button. (→254)
Take still pictures
• To change the setting or disconnect, press [Wi-Fi] button. (→186)
You cannot change the settings while sending still pictures. Wait until sending is
complete.
To Next Page
Loading...
