GPS
Using the GPS log
VQT5E85
- 275 -
Outputting the GPS log file
Convert GPS log files (NMEA format) to KML format and output to use it on a website,
etc., that supports the KML format.
Select [GPS Log] from [GPS] menu and press [MENU/SET]
Use to select [KML File Output] and press [MENU/SET]
Use to select the GPS log recording date and press
[MENU/SET]
Already output
• Displays up to 1,000 items.
• The confirmation screen appears. Select [Yes] to perform output.
• If the time zones of the area set in [Home] under [World Time] and the area of the
GPS information received by the camera are different, the time difference relative
to GMT is displayed on the screen.
■
Save destination of the GPS log file
The log/output file is saved in the following folder on your card.
AD_LUMIX
GPSLOG
KML ← Save destination of the output file
NMEA ← Save destination of the original data
●
The GPS log file may contain information that identifies the individual. When
uploading data to a WEB service, please check carefully before uploading.
●
For information on whether the file format this unit can output is compatible with a
website, check the website’s Q&A section.
To Next Page
Loading...
