Wi-Fi/NFC
Sending pictures to a PC
VQT5E85
- 220 -
Select [SINGLE] or [MULTI]
• To change the setting or disconnect, press [Wi-Fi] button. (→186)
■
When [SINGLE] is selected
Select the picture
Select [Set]
■
When [MULTI] is selected
Select the picture (repeat)
• If selected again, the setting will be cancelled.
Select [OK]
• The number of pictures that can be sent by
[MULTI] is limited.
• Confirmation screen is displayed. If you select [Yes], the operation is executed.
●
Folders sorted by the sent date are created in the specified folder, and pictures are
saved in those folders.
●
If the screen for a user account and password entry appears, enter the one you set on
your PC.
●
If the computer name (for Mac, the NetBIOS name) contains spaces, etc., the name
may not be properly recognised. If you cannot connect, we recommend changing
the computer name (for Mac, the NetBIOS name) to a combination of 15 or less
alphanumeric characters only.
To Next Page
Loading...
