Drive / Shutter / Image Stabilizer – High Resolution mode
218
[Simul Record Normal Shot]
Simultaneously takes pictures that are not merged when [ON] is set. The first
picture will be saved with [Picture Size] set to [L].
[Shutter Delay]
Sets the delay time from when the shutter button is pressed until the shutter is
released.
[30 SEC]/[15 SEC]/[8 SEC]/[4 SEC]/[2 SEC]/[1 SEC]/[1/2 SEC]/[1/4 SEC]/[1/8
SEC]/[Off]
[Motion Blur Processing]
Sets the correction method to use when the subject moved.
[MODE1]: This gives priority to High Resolution mode, therefore subject blur
appears as an afterimage in the picture.
[MODE2]: This reduces afterimage from subject blur, but cannot obtain the
same High Resolution mode effect in the corrected range.
To Next Page
Loading...
