Connecting to Other Devices – Tethered Recording
741
Remote Control of Multiple Cameras
A number of cameras can be remotely controlled using “LUMIX Tether”.
Getting started:
• Turn on the camera and PC.
• Install “LUMIX Tether ” on PC.
1
Set the camera as a DHCP client (default setting).
≥ [] [] [LAN / Wi-Fi] [LAN / Wi-Fi Setup] [IP
Address Setting (LAN)] [DHCP Client]
•
If there is no DHCP server in the LAN, it is also possible to make the
connection by setting one camera as [DHCP Server], and the remainder as
[DHCP Client].
• If you have modified settings in [IP Address Setting (LAN)], turn the camera
off and on again.
To Next Page
Loading...
