Panasonic LUMIX S5IIX

Drive / Shutter / Image Stabilizer – Image Stabilizer
262
Image Stabilizer Settings
Set the image stabilizer operation to match the recording situation.
Picture:  []  []  Select [Image Stabilizer]
Video:  []  []  Select [Image Stabilizer]
[Operation Mode]
Sets the stabilization movement (blur) to match the recording method (normal,
panning). ([Operation Mode]: 264)
[Body(B.I.S.) / Lens(O.I.S.)]
[ ] ([Body]): The in-body image stabilizer corrects for vertical, horizontal, and
rotational shake.
[ ] ([Lens + Body (Roll)]): The in-lens image stabilizer corrects for vertical and
horizontal shake, while the in-body image stabilizer corrects for rotational shake.
• This can be set when using other manufacturers’ lenses with an image stabilization
function.
[When to Activate]
[ALWAYS]: The image stabilizer is always operating.
[HALF-SHUTTER]: The image stabilizer operates when the shutter button is pressed
halfway.
[E-Stabilization (Video)]
Camera shake during video recording is corrected along the vertical, horizontal, roll,
pitch, and yaw axes through the combined use of the in-lens, in-body, and electronic
image stabilizers. (5-Axis Hybrid Image Stabilizer)
• The [ ] on the recording screen changes to [ ] while [E-Stabilization (Video)]
is functioning.
• The angle of view may become narrower if set to [ON].