Connecting to Other Devices – Tethered Recording
738
Operating the Camera from a PC
Getting started:
• Turn on the camera and PC.
• Install “LUMIX Tether ” on PC.
1
Connect the camera and PC with the USB connection
cable. (USB port: 725)
2
Press 34 to select [PC(Tether)] and then press or
.
≥[ ] is displayed on the camera’s screen.
3
Use “LUMIX Tether” to operate the camera from the PC.
• If [USB Mode] is set to [PC(Tether)] in the [Setup] ([IN/OUT]) menu, the camera
will be automatically connected to the PC without the [USB Mode] selection
screen being displayed. ([USB Mode]: 620)
• When there is a PC connection with [PC(Tether)], the following functions are not
available:
– [Streaming]
– [Wi-Fi Function] ([LAN / Wi-Fi])
– [Bluetooth]
To Next Page
Loading...
