Drive / Shutter / Image Stabilizer – Image Stabilizer
268
[Focal Length]
Enter the focal length.
• The live view images can be enlarged for display when you rotate .
[I.S. Area]
You can set the range of stabilisation for the image stabiliser so that vignetting does
not occur due to the image stabiliser.
[70%]/[80%]/[90%]/[100%]
• Rotate to select the range of stabilisation, then press or to confirm.
• When the four edges are selected by pressing 3421, the in-body image stabiliser
works and you can see if there is any vignetting. If vignetting has occurred, set again
to a smaller range.
[Lens Name]
Register the lens.
• How to enter characters (Entering Characters: 101)
• Up to a maximum of 30 characters can be entered.
To Next Page
Loading...
