White Balance / Image Quality – Lens Compensation
334
When Using Other Than an L-Mount Lens
You can compensate for the color shading for other than L-Mount lenses
and register the compensation details.
Select [Color Shading Compensation].
• [ ]/[ ] [] [Color Shading Compensation]
[MANUAL]
Compensate for the color shading of the attached lens.
1 Press 34 to select [MANUAL] and then press or .
2 Press [DISP.] to execute color shading compensation.
• Execute while the screen is filled with a subject that has no color variation,
such as a white or gray one.
• If further adjustment is required, press 4 and make fine adjustments manually.
3 Press or to confirm the setting.
• The compensation value and adjusted value are not recorded. To record them,
press [DISP.] in the adjustment screen and make a preset registration.
[PRESET]
Compensate for the color shading of the attached lens and make a preset registration.
(Registering presets: 335)
You can also call up presets that have already been registered.
[OFF]
The color shading compensation is not applied.
[ADJUST]
Fine-adjust the red tint and blue tint.
• The adjusted value is not recorded.
• If a compensation value already registered in [PRESET] is adjusted, [¢] is displayed
next to [PRESET].
To Next Page
Loading...
