Camera Customization – Fn Buttons
540
3
Find the function to register.
≥Rotate to select the sub tab where the function to register is
categorized (Setting Items ([Fn Button Set]/[Setting in REC
mode]): 542, Setting Items ([Fn Button Set]/[Setting in PLAY
mode]): 548) and then press or .
≥You can also select by pressing 2 to select the sub tab, pressing
34 or rotating , and then pressing 1.
≥Switch the [1] to [3] tabs by pressing [Q].
4
Register the function.
≥Press 34 to select a function and then press or .
≥Selection is also possible by rotating or .
•
Select items with [>] by selecting the item again.
• Depending on the button, some functions cannot be registered.
To Next Page
Loading...
