Wi-Fi / Bluetooth – Operating the Camera with a Smartphone
669
Shortening the Return Time from [Sleep Mode]
You can shorten the time it takes for the camera to return from [Sleep
Mode] when the [Shutter Remote Control] is used.
Getting started:
• Connect the camera to a smartphone by Bluetooth. (Connecting to a Smartphone
(Bluetooth Connection): 649)
• Set [Remote Wakeup] in [Bluetooth] to [ON]. ([Remote Wakeup]: 676)
[] [] [Bluetooth] Select [Returning from Sleep Mode]
[Import / Remote Priority]
Shortens the time to return when using [Import images] or [Remote shooting].
[Remote Shutter Priority]
Shortens the time to return when using [Shutter Remote Control].
• To use the [Shutter Remote Control] to cancel [Sleep Mode] on the camera, set
[Bluetooth] in the [Setup] ([IN/OUT]) menu as follows, then connect via Bluetooth:
– [Remote Wakeup]: [ON] ([Remote Wakeup]: 676)
– [Auto Transfer]: [OFF] ([Auto Transfer]: 672)
• The camera cannot be turned on by using [Shutter Remote Control].
To Next Page
Loading...
