Streaming Function – Stream by Operating the PC
711
2
Set [IP Address Setting (LAN)] to the same network as
the PC.
≥ [] [] [LAN / Wi-Fi] [LAN / Wi-Fi Setup] [IP
Address Setting (LAN)] ([IP Address Setting (LAN)]: 697)
•
If you have modified settings in [IP Address Setting (LAN)], turn the camera
off and on again.
3
Set up streaming settings on the camera.
≥ [] [] [Streaming]
1 In [Streaming Method], select [Via PC Software], and set [Connection
Method] to [LAN].
2 In [Streaming Setup], set [Streaming Quality] and [RTSP Port].
3 Set [Streaming Function] to [ON].
• [ ] is displayed on the recording screen.
4
Connect the commercially available USB ethernet
adaptor to the camera, then use commercially available
LAN cables to connect the camera and the PC to a
router.
To Next Page
Loading...
