Connecting to Other Devices – Tethered Recording
743
• When a wired LAN connection is not to be used, set [Tether(USB ethernet
adaptor)] to [OFF].
When set to [ON], power is supplied from the battery of this camera to the
connected device, so the battery will be consumed faster.
• When using “LUMIX Tether ” with a wired LAN connection, the following functions
are not available:
– [Wi-Fi Function] ([LAN / Wi-Fi])
– [Bluetooth]
• When recording with multiple tethered cameras, we recommend allocating
unique device names to each of the cameras:
[] [] [LAN / Wi-Fi] [LAN / Wi-Fi Setup] [Device Name/
Password] [Device Name]
To Next Page
Loading...
