EN12
Maintenance
When maintaining the nozzle, always close the vacuum cleaner and remove the nozzle.
(To avoid injury)
After removing the dust bin (P
.
EN10 ~ EN11), insert chopsticks, etc. to remove the foreign matter
When the suction power declines significantly or the running sound sounds abnormal, check whether the air passageway
is obstructed by foreign matter.
Air passageway
Non-
washable
Non-
washable
Non-
washable
Non-
washable
If the dust sensor lamp is abnormal (P. EN15), rubbish
or dust may adhere to the sensor part (2 places) inside
the body. Please perform maintenance.
Use a soft, dry cloth to wipe the attached rubbish,
dust, etc. from the front end
Sensors
Sensors
Sensors
About 7 cm
Air passageway
Plug
Remove rubbish from the plug ( areas)
(P. EN4 ~ EN5)
Wipe up dirt, dust, etc. with a wrung soft and
damp cloth.
Body, extension wand etc.
Body, extension wand etc.
Tap lightly to remove rubbish, dust, etc., or gently wash
and dry thoroughly.
Pre Filter
Mattress nozzle
Remove rubbish from areas
Gently clean
When the vacuum cleaner becomes dirty
When the suction power is weakened or about once a month
To Next Page
Loading...
